Contractors in Glendale, Arizona
Maricopa County • Population: 260,572
Showing 81 verified contractors
π¦Gutter Cleaning in Glendale
Quick answer
The City of Glendale's Building Safety division issues permits, and contractors must hold an Arizona ROC license plus a City of Glendale business license before working in the city. Replacing a furnace, AC unit or water heater needs no permit when a licensed contractor installs it, and a permit expires if no inspection passes within 180 days.
Glendale adds a step many neighboring cities don't spell out: your contractor needs a City of Glendale business license on top of the state ROC license. The city's permit Q&A also answers the common swap questions directly.
Who issues building permits
Glendale's Building Safety, Codes & Services division handles building permits. Plans go in by email through the city's electronic plan review, with the permit application, drawings and any calculations in PDF form (Building Permits). A homeowner, architect or licensed contractor may apply. For a home improvement project, you can prepare the drawings yourself if they're accurate, legible and complete. Fees are usually based on the square footage of the construction area. The Development Services Center is at 623-930-2800.
Licenses the city checks
The city's permit Q&A says contractors must be licensed by the Arizona Registrar of Contractors, give their license number, and have a City of Glendale business license before doing work in the city. Homeowners doing their own work sign a statement that they're doing it themselves.
Before signing, look the contractor up on the ROC Contractor Search and ask for their Glendale business license number. Our Arizona licensing guide and unlicensed contractor penalties page explain what's at stake if a contractor isn't licensed.
Do I need a permit to...
From the same Q&A:
- Replace windows: only if you make structural changes, such as changing the window size, which can require a larger header. Bedroom windows have rules for opening size, locks and sill height, and some locations require tempered glass.
- Replace broken glass: no permit, but check whether the location now requires safety glazing.
- Extend a circuit or add outlets: yes.
- Replace a loose receptacle: no.
- Replace drain pipes for sinks and toilets: yes.
- Install, replace or extend a gas pipe: yes, and the city checks pipe sizing.
- Replace a heater, air conditioner or water heater: no permit if a licensed contractor installs it (residential only).
Permit time limits
A Glendale permit expires if work doesn't start within 180 days of issuance. You must request and pass at least one inspection in every 180-day period, and there's a two-year maximum to finish, under city ordinance 2448. Extending a permit that hasn't expired costs 50% of the original permit fee; renewing an expired one costs 100%, and if the codes changed in the meantime you may need new plans. Some projects also need special inspections by an engineer you hire, such as for soils, structural steel or electrical equipment rated 1,000 amps or more.
Landscape conversion rebate
Glendale's water conservation rebates are for single-family homes on Glendale water with no outstanding city debt:
- Existing home conversion: up to $3,000 for xeriscape at $1.00 per square foot, or up to $250 for artificial grass at $0.25 per square foot. You must remove at least 500 square feet of grass that was irrigated with average coverage of 70% or more, and finish within 24 months of applying.
- New home landscaping: up to $500 for xeriscape and $250 for artificial grass, with at least 1,000 square feet installed. Builder xeriscape packages don't qualify.
- Every project needs at least one drought-tolerant tree, 75% of new plants from the ADWR Phoenix AMA low-water-use list, and no bare soil. Rock ground cover must be at least 1/4 inch.
- Smart irrigation controllers and other irrigation upgrades can add up to $750.
HOA members must make sure the new landscape follows their CC&Rs.
Summer work hours
A.R.S. 9-500.52 bars Arizona cities from enforcing a noise rule that stops permitted construction between 5 a.m. and 7 p.m. on business days from May 1 to October 15, so expect early starts on summer jobs.
Weather
NOAA's 1991-2020 normals for Phoenix Deer Valley Airport, northeast of Glendale, show 8.90 inches of precipitation a year, 159 days at 90Β°F or hotter and 90 days at 100Β°F or hotter. July through September brings 2.48 inches in the monthly normals. Book AC work in spring, and have roofs and gutters checked before monsoon storms.
Find contractors in Glendale
The directory lists Glendale plumbers, electricians, HVAC companies, roofers, remodelers, landscapers, painters, fence companies, concrete contractors and window and door companies.
Check prices with our Arizona electrical costs and landscaping costs, work through the hiring checklist, and get quotes.
Sources
- City of Glendale: Building Permits
- City of Glendale: Building Permits Q & A
- City of Glendale: Water Conservation Rebates
- A.R.S. 9-500.52: Construction; summertime hours
- Arizona ROC Contractor Search
- NOAA 1991-2020 annual/seasonal normals: Phoenix Deer Valley Muni AP (USW00003184)
- NOAA 1991-2020 monthly normals: Phoenix Deer Valley Muni AP (USW00003184)
Frequently asked questions
Do I need a permit to replace my AC or water heater in Glendale?
Not for a residential replacement installed by a licensed contractor. Glendale's permit Q&A says a heater, air conditioner or water heater replacement doesn't need a permit when a licensed contractor installs it. Extending a circuit, replacing drain piping and any gas pipe work do need permits.
Does a contractor need a Glendale business license?
Yes. Glendale's permit Q&A says contractors must be licensed by the Arizona Registrar of Contractors, give their license number, and have a City of Glendale business license before doing work in the city.
How long is a Glendale building permit good for?
A permit expires if work doesn't begin within 180 days of issuance, and you must pass at least one inspection every 180 days to keep it active. There's a two-year maximum to complete the project. Extending a live permit costs 50% of the original fee; renewing an expired one costs 100%.
How much is Glendale's grass removal rebate?
For existing homes, Glendale pays $1.00 per square foot up to $3,000 for converting grass to xeriscape, or $0.25 per square foot up to $250 for artificial grass. You must remove at least 500 square feet of reasonably healthy grass and plant at least one drought-tolerant tree.