Replacing a central air conditioner in Phoenix costs about $6,892 on average, with most jobs between $5,091 and $8,837, according to Angi's Phoenix guide (updated August 4, 2026). A basic heat pump install runs $6,461 to $7,685 in Homewyse's Phoenix and Tucson ZIP code runs. In a state where cooling runs for months, size and efficiency matter as much as the sticker price.

HVAC prices in Arizona

Job Range or cost Source
AC replacement, Phoenix $5,091โ€“$8,837 (average $6,892) Angi Phoenix AC guide
Central AC, Phoenix $5,000โ€“$9,000 Angi Phoenix AC guide
Ductless system, Phoenix $7,000โ€“$17,000 Angi Phoenix AC guide
Heat pump, Phoenix $4,801โ€“$7,376 (average $6,088) Angi Phoenix heat pump guide
Heat pump install, basic, Phoenix ZIP $6,512โ€“$7,685 Homewyse calculator
Heat pump install, basic, Tucson ZIP $6,461โ€“$7,624 Homewyse calculator
Split system air conditioner, basic, Phoenix ZIP $3,980โ€“$4,712 Homewyse calculator
Split system air conditioner, basic, Tucson ZIP $3,938โ€“$4,661 Homewyse calculator
Gas furnace, basic, Phoenix ZIP $3,003โ€“$3,572 Homewyse calculator
Gas furnace, basic, Tucson ZIP $2,971โ€“$3,534 Homewyse calculator
HVAC conversion to all-electric, Phoenix $17,351 Cost vs Value 2025
HVAC conversion to all-electric, Tucson $19,895 Cost vs Value 2025

Sources: Angi, "How Much Does AC Replacement Cost in Phoenix?" updated August 4, 2026; Angi, "How Much Does a Heat Pump Cost in Phoenix?" updated August 4, 2026; Homewyse heat pump, split system air conditioner and gas furnace calculators, May 2026 cost data, ZIP codes 85004 (Phoenix) and 85701 (Tucson); JLC Cost vs Value Report 2025, Phoenix and Tucson. Accessed November 2026.

Homewyse builds a basic one-unit install from equipment, labor and supply costs, so its numbers sit at the low end and leave out duct changes. Angi's averages reflect what Phoenix jobs cost in practice, with more variety in size and efficiency. Cost vs Value prices a full conversion project that is the same in every city. Tucson came in $2,544 above Phoenix and above both the Mountain region ($17,886) and national ($19,484) figures.

AC replacement by home size (Phoenix)

Home size Typical tonnage Cost range
1,200 sq ft 1.5โ€“2 $2,500โ€“$5,000
1,500 sq ft 2โ€“3 $3,000โ€“$7,000
2,000 sq ft 3โ€“4 $3,500โ€“$8,000
2,500 sq ft 4โ€“5 $4,000โ€“$9,000
3,000 sq ft 5+ $9,000โ€“$12,700

Source: Angi Phoenix AC replacement guide, updated August 4, 2026.

Add-ons that show up on Arizona HVAC bids

  • Ductwork: Angi's Phoenix heat pump guide puts duct replacement at $447 to $1,587, and a new duct system at $3,000 to $7,500 per 300 linear feet.
  • Electrical: A new system may need a dedicated circuit. Angi's Phoenix AC guide puts hiring an electrician at $164 to $567.
  • Condensate drain: Angi lists hiring a Phoenix plumber for drain line work at $198 to $585 if the HVAC crew doesn't handle it.
  • Labor: Angi says Phoenix HVAC pros charge $80 to $150 an hour, or $1,500 to $4,000 for the labor on a replacement.

What drives HVAC prices in Arizona

Refrigerated air versus evaporative cooling. Arizona homes are cooled either by refrigerated air or by evaporative (swamp) coolers, and SRP's cool roof program accepts homes with either. ROC's R-39 class covers both. We found no Arizona cost data for evaporative coolers from the sources on this page, so get local quotes. In Phoenix, replacing an evaporative cooler in kind, rated 6,500 cfm or less, needs no mechanical permit. SRP's Cool Cash rebate applies to central AC, heat pump and mini-split systems, not evaporative coolers.

Sizing and efficiency. SRP warns that an oversized unit short-cycles, which wears it out and raises bills. Angi's Phoenix guide ranges from $2,500 to $7,000 for a 14 to 15 SEER system up to $4,000 to $12,700 for 20 SEER and higher. SRP estimates a 3-ton single-stage system rated 16 SEER saves about $240 a year over an old 11 SEER unit, and a 20 SEER2 variable-capacity system about $370 a year.

Summer demand. A failed AC in July is an emergency in Phoenix, and you lose the chance to compare bids. Replacing an aging system in spring or fall gives you time to get three estimates.

Labor. Arizona HVAC mechanics and installers earned a mean of $29.28 an hour in May 2025, against $31.14 nationally. The mean was $29.91 in the Phoenix-Mesa-Chandler metro and $26.84 in Tucson (U.S. Bureau of Labor Statistics).

Tax. The Arizona Department of Revenue lists removing and replacing an HVAC unit as MRRA work, which is not subject to prime contracting tax. The contractor pays tax on equipment and materials and should not add a tax line to your invoice (ADOR).

Permits and licensing

Phoenix lists AC repairs or replacements that don't increase size and capacity or change location among projects that need no permit (City of Phoenix). Its Work Exempt from Permit list covers in-kind replacement of an outdoor refrigeration unit up to 5 tons of the same weight. An indoor unit, a change to a different refrigerant class, or changes to roof framing, ducts or wiring need a permit. Other cities set their own rules; see Arizona building permit requirements.

HVAC work on a home needs the ROC's R-39 Air Conditioning and Refrigeration class, or the dual CR-39 or CR-79 (ROC license classifications). The R-39 contractor may add a circuit to your existing panel for the equipment but must leave a new service panel to an electrical contractor. Gas piping appears in the R-37 plumbing class description, and the handyman exemption never covers work that connects to a gas supply (A.R.S. 32-1121(D)). Check the license on the ROC Contractor Search and read the Arizona contractor licensing guide.

Rebates in Arizona

SRP's Cool Cash rebate, for permanent SRP residential electric customers (SRP):

System (15.2 SEER2 or higher) Rebate per ton
Single-stage AC or heat pump $75
Multi-stage AC or heat pump $150
Variable-capacity AC or heat pump $225
Inverter-driven mini-split heat pump $225

The system must replace or supplement an existing central AC or heat pump, be installed by a contractor licensed in Arizona for residential AC before April 30, 2027, and be listed in the AHRI directory. Single-stage systems need a Manual J load calculation, split systems need both the indoor and outdoor units replaced, and you must apply within six months. SRP's page also points to the state's Efficiency Arizona program, which may offer rebates on heat pumps for qualifying households, with eligibility and amounts set by the state.

Ways to keep the cost down

  • Get at least three written estimates with the same tonnage, efficiency rating and scope of duct work. ROC recommends three.
  • Ask for a Manual J load calculation so you don't pay for an oversized system.
  • If you're an SRP customer, choose a qualifying system and make sure the contractor signs SRP's contractor terms so you can claim the rebate.
  • Replace before the system fails in summer, when you have time to compare.

Get HVAC quotes

Request free quotes from Arizona HVAC contractors, or browse licensed HVAC contractors in Arizona. If your panel needs work, see electrical costs in Arizona, and for every trade in one place, our Arizona cost guides.

Sources

Frequently Asked Questions

Do I need a permit to replace my AC in Phoenix?

Not for a like-for-like swap. Phoenix lists AC repairs or replacements that don't increase size and capacity or change location among projects that need no permit, and its exempt list covers in-kind replacement of an outdoor unit up to 5 tons. An indoor unit, a change of refrigerant class, a bigger system or a new location needs a permit.

What AC rebates are available in Arizona?

SRP's Cool Cash rebate pays its residential electric customers $75 per ton for a single-stage system, $150 per ton for multi-stage and $225 per ton for variable-capacity systems or inverter-driven mini-split heat pumps rated 15.2 SEER2 or higher. An Arizona-licensed residential AC contractor must install it before April 30, 2027, and you must apply within six months. SRP's page also points to the state's Efficiency Arizona program for qualifying households.

What size AC does an Arizona home need?

Angi's Phoenix guide pairs about 3 to 4 tons with a 2,000 sq ft home and 4 to 5 tons with 2,500 sq ft. SRP warns that an oversized unit short-cycles, turning on and off rapidly, which wears it out and raises bills, and it requires a Manual J load calculation for single-stage systems in its rebate program. Ask for a load calculation rather than a rule of thumb.

What license does an Arizona HVAC contractor need?

The ROC's R-39 Air Conditioning and Refrigeration class, or the dual CR-39 or CR-79. ROC's description covers refrigerated air, evaporative cooling, ventilating and heating, and lets the contractor add a circuit to an existing panel but not install a new service panel.