A new concrete driveway in Phoenix costs $2,789 to $14,979, about $6,611 on average, according to Angi's Phoenix guide (updated May 5, 2026). That works out to $8 to $20 per square foot. Patios and slabs cost less per square foot, and decorative finishes like stamping cost more.

Concrete prices in Arizona

Job Range or cost Source
Concrete driveway, Phoenix $2,789โ€“$14,979 (average $6,611) Angi Phoenix driveway guide
Concrete driveway, per sq ft, Phoenix $8โ€“$20 Angi Phoenix driveway guide
400 sq ft (20x20) driveway, Phoenix $2,400โ€“$4,400 (average $3,400) Angi Phoenix driveway guide
Concrete driveway, 600 sq ft, basic, Phoenix ZIP $4,754โ€“$5,692 Homewyse calculator
Concrete driveway, 600 sq ft, basic, Tucson ZIP $4,686โ€“$5,610 Homewyse calculator
Concrete patio, 300 sq ft, basic, Phoenix ZIP $2,682โ€“$3,236 Homewyse calculator
Concrete patio, 300 sq ft, basic, Tucson ZIP $2,643โ€“$3,189 Homewyse calculator
Stamped concrete patio, 300 sq ft, Phoenix ZIP $6,556โ€“$7,919 Homewyse calculator
Stamped concrete patio, 300 sq ft, Tucson ZIP $6,440โ€“$7,778 Homewyse calculator
Concrete slab, Phoenix (30x30 example) $3,719โ€“$7,438 (about $5,578) Angi Phoenix slab guide
Concrete block wall, 150 sq ft of wall, Phoenix ZIP $2,154โ€“$2,797 Homewyse calculator
Concrete block wall, 150 sq ft of wall, Tucson ZIP $2,121โ€“$2,757 Homewyse calculator

Sources: Angi, "How Much Does a Concrete Driveway Cost in Phoenix, AZ?" updated May 5, 2026; Angi, "How Much Does a New Concrete Slab Cost in Phoenix, AZ?" updated April 26, 2026; Homewyse concrete driveway, concrete patio, stamped concrete patio and concrete block wall calculators, May 2026 cost data, ZIP codes 85004 (Phoenix) and 85701 (Tucson). Accessed November 2026.

Homewyse's basic driveway works out to $7.81 to $9.49 per square foot, at the low end of Angi's $8 to $20 range, because it prices a plain new pour without removing an old driveway or grading. Angi's driveway range includes removal and bigger layouts. Stamping more than doubles a patio in Homewyse's runs.

Slab prices by use (Phoenix)

Use Size Average cost
Shed foundation 80 sq ft $496
Parking pad 200 sq ft $1,240
One-car driveway 240 sq ft $1,488
Garage floor 350 sq ft $2,169
Patio 450 sq ft $2,789
Two-car driveway 500 sq ft $3,099
RV pad 640 sq ft $3,967

Source: Angi Phoenix concrete slab guide, updated April 26, 2026.

Add-ons that show up on Arizona concrete bids

  • Removing an old driveway: $1.20 to $1.90 per square foot, or $800 to $2,400 for a standard driveway (Angi Phoenix driveway guide).
  • Excavation and grading: $1,200 to $3,000 for a new Phoenix driveway, which Angi ties to protecting against intense rainfall.
  • Decorative finishes: exposed aggregate $7.25 to $15.50, stamped $10.35 to $18.60 and stained $8.26 to $15.50 per square foot (Angi Phoenix slab guide).
  • Resurfacing instead: $3.10 to $5.20 per square foot, if the slab is sound enough to keep (same source).

What drives concrete prices in Arizona

Caliche. University of Arizona Cooperative Extension describes caliche as soil cemented by calcium carbonate, ranging from loose lumps to rock-like layers several feet thick, and calls it common in southern Arizona. Digging footings for walls, post holes or a deep base through it is slower work. Ask whether the bid assumes caliche and what it charges if the crew hits it.

Heat. Angi's Phoenix slab guide notes that triple-digit days are normal and that slabs should be built for the heat and shifting desert soil. Ask how the crew schedules and cures pours in summer.

Monsoon drainage. Angi ties the grading cost on Phoenix driveways to heavy rain, and the National Weather Service in Phoenix warns about flash flooding during the monsoon. Slope and drainage should be in the bid.

Labor. Arizona cement masons and concrete finishers earned a mean of $28.62 an hour in May 2025, against $28.87 nationally. The mean was $29.25 in the Phoenix-Mesa-Chandler metro and $26.58 in Tucson (U.S. Bureau of Labor Statistics). Angi says Phoenix concrete pros charge $6 to $11 per square foot for driveway installation, or $60 to $100 an hour.

Tax. The Arizona Department of Revenue treats work on existing property, such as repairing or replacing what's there, as MRRA, which is not subject to prime contracting tax. Its own example: a new block wall on ground with no prior structure is not existing property, but hiring someone later to stucco and paint that wall is (ADOR). Ask the contractor how your job is taxed; A.R.S. 32-1158 requires the contract price to include all applicable taxes.

Permits and licensing

Phoenix's Work Exempt from Permit list exempts platforms, sidewalks and driveways no more than 30 inches above grade that aren't over a story below and aren't part of an accessible route. Fences, including block walls used as fences, need a permit once they're over 3 feet tall, and retaining walls over 3 feet need one too. Other cities set their own rules; see Arizona building permit requirements.

Concrete work needs the ROC's R-9 Concrete class or the dual CR-9. The R-21 Hardscaping class covers non-loadbearing concrete and uncovered patios but excludes concrete driveways and perimeter fencing. Block walls fall under R-31 Masonry, and R-14 Fencing covers cement block fencing (ROC license classifications). ROC warns that traveling crews target homeowners with bogus driveway paving at inflated prices (ROC). Check the license on the ROC Contractor Search and see the Arizona contractor licensing guide.

Ways to keep the cost down

  • Get at least three written bids with the same thickness, reinforcement, finish and base. ROC recommends three.
  • Resurface a sound slab instead of replacing it, using Angi's resurfacing range as a check.
  • Pour plain concrete and add color or a broom finish rather than stamping.
  • Combine a patio and walkway into one pour to cut mobilization charges.

Get concrete quotes

Request free quotes from Arizona concrete contractors, or browse concrete contractors in Arizona. Adding a block wall or fence? See fencing costs in Arizona, or every trade in our Arizona cost guides.

Sources

Frequently Asked Questions

Do I need a permit for a concrete driveway or patio in Phoenix?

Phoenix's Work Exempt from Permit list exempts platforms, sidewalks and driveways no more than 30 inches above grade, not over a story below and not part of an accessible route, which covers a typical on-grade patio or driveway. If the work touches the street or public sidewalk, ask the city what it requires.

How much does a concrete block wall cost in Arizona?

Homewyse prices a basic concrete block wall at $14.14 to $18.65 per square foot of wall across Phoenix and Tucson ZIP codes, or $2,121 to $2,797 for 150 square feet (May 2026 cost data). In Phoenix, a wall used as a fence needs a building permit once it's over 3 feet tall.

What license does a concrete contractor need in Arizona?

The ROC's R-9 Concrete class, or the dual CR-9, covers concrete and concrete products. The R-21 hardscaping class covers non-loadbearing concrete but excludes concrete driveways, and block walls fall under R-31 Masonry or, for fencing, R-14.

Does caliche raise the cost of concrete work in Arizona?

It can. University of Arizona Cooperative Extension describes caliche as soil cemented by calcium carbonate, from lumps to rock-like layers several feet thick, common in southern Arizona. Digging footings or grading through it takes more time and equipment, so ask whether the bid allows for it.