A basic 150-foot wood privacy fence costs $4,099 to $6,570 in Phoenix and Tucson ZIP codes, according to Homewyse's May 2026 cost data. Vinyl runs about twice that and chain link a little less. Block walls, common around desert yards, are priced by the square foot of wall.

Fence prices in Arizona

Job (150 linear feet unless noted) Range or cost Source
Wood privacy fence, basic, Phoenix ZIP $4,133โ€“$6,570 Homewyse calculator
Wood privacy fence, basic, Tucson ZIP $4,099โ€“$6,504 Homewyse calculator
Vinyl fence, basic, Phoenix ZIP $7,898โ€“$10,887 Homewyse calculator
Vinyl fence, basic, Tucson ZIP $7,855โ€“$10,814 Homewyse calculator
Chain link fence, basic, Phoenix ZIP $3,554โ€“$5,384 Homewyse calculator
Chain link fence, basic, Tucson ZIP $3,524โ€“$5,328 Homewyse calculator
Concrete block wall, 150 sq ft of wall, Phoenix ZIP $2,154โ€“$2,797 Homewyse calculator
Concrete block wall, 150 sq ft of wall, Tucson ZIP $2,121โ€“$2,757 Homewyse calculator
Wood fence, per linear foot, Phoenix $10โ€“$50 Angi Phoenix wood fence guide
Wood fence project, Phoenix $427โ€“$2,948 (average $1,364) Angi Phoenix wood fence guide

Sources: Homewyse wood privacy fence, vinyl fence, chain link fence and concrete block wall calculators, May 2026 cost data, ZIP codes 85004 (Phoenix) and 85701 (Tucson); Angi, "How Much Does Wood Fence Installation Cost in Phoenix?" updated December 8, 2025. Accessed November 2026.

Cost per linear foot (Homewyse)

Material Phoenix ZIP Tucson ZIP
Chain link $23.69โ€“$35.90 $23.49โ€“$35.52
Wood privacy $27.55โ€“$43.80 $27.33โ€“$43.36
Vinyl $52.65โ€“$72.58 $52.37โ€“$72.09

Source: Homewyse fence calculators, May 2026 cost data.

Angi's Phoenix average of $1,364 covers smaller jobs than Homewyse's 150-foot run, so it reads lower. Its per-foot range ($10 to $50) brackets Homewyse's wood figures. The block wall figure is per square foot of wall face, not per linear foot: a 6-foot wall 25 feet long is 150 square feet.

Add-ons that show up on Arizona fence bids

  • Gate: $150 to $500 for a standard 4-foot gate (Angi Phoenix).
  • Removing an old fence: $300 to $500, or $3 to $5 per linear foot (Angi Phoenix).
  • Grading: $1,000 to $3,200 for a sloped yard, from about $400 for a small area (Angi Phoenix).
  • Stain or paint: $750 to $4,250 for a wood fence (Angi Phoenix).

What drives fence prices in Arizona

Caliche. Angi's Phoenix guide says the desert climate and dense caliche layers make fence installation harder there. University of Arizona Cooperative Extension describes caliche as soil cemented by calcium carbonate, from lumps to rock-like layers several feet thick. Post holes through caliche take more time or a power auger, which Angi's Phoenix guide lists at $60 to $600.

Material and sun. Vinyl costs about twice as much as wood per foot in Homewyse's runs. This Old House's Arizona roofing guide says UV exposure and thermal cycling deteriorate wood quickly in the state's arid climate, so ask what stain or sealer a wood fence bid includes and how often it needs redoing.

HOA rules. Angi's Phoenix guide notes strict HOA requirements in many neighborhoods. ROC says it's your job to tell the contractor about CC&R restrictions before you sign, so get HOA approval for height, material and color first.

Labor. Arizona fence erectors earned a mean of $23.37 an hour in May 2025, against $24.29 nationally, and $23.61 in the Phoenix-Mesa-Chandler metro (U.S. Bureau of Labor Statistics; BLS published no Tucson figure for this job). Angi says Phoenix fencing pros charge $30 to $50 an hour.

Tax. The Arizona Department of Revenue uses a block wall as its example: building a new wall where nothing stood before is not work on existing property, while hiring someone later to stucco and paint that wall is MRRA work, which is not subject to prime contracting tax (ADOR). A.R.S. 32-1158 requires your contract price to include all applicable taxes.

Permits and licensing

Phoenix exempts fences up to 3 feet tall. A fence over 3 feet and up to 6 feet needs a building permit showing it meets zoning and site drainage rules, and a fence over 6 feet needs a full building code review. Retaining walls over 3 feet also need a permit (City of Phoenix; Work Exempt from Permit). Other cities set their own rules; see Arizona building permit requirements.

Fence work needs the right ROC class (ROC license classifications):

Class Covers
R-14 Fencing Metal, wood and cement block fencing, automatic gates; not retaining walls
R-24 Ornamental Metals Wrought iron fencing and gates, railings
R-31 Masonry Brick, concrete block and stone
R-21 Hardscaping Fences and screens up to six feet and garden walls; not perimeter fencing

Check the license on the ROC Contractor Search and see the Arizona contractor licensing guide. A fence job under $1,000 that needs no permit can fall under the handyman exemption (A.R.S. 32-1121), but in Phoenix any fence over 3 feet needs a permit.

Ways to keep the cost down

  • Get at least three written bids for the same height, material, post spacing and footing depth. ROC recommends three.
  • Ask each bidder how it handles caliche and what it charges if the crew hits it.
  • Share the cost of a boundary fence or wall with your neighbor, in writing.
  • Reuse sound posts or a block base where the contractor agrees they're in good shape.

Get fencing quotes

Request free quotes from Arizona fence contractors, or browse fencing contractors in Arizona. Pouring a footing or patio too? See concrete costs in Arizona and landscaping costs, or every trade in our Arizona cost guides.

Sources

Frequently Asked Questions

Do I need a permit for a fence in Phoenix?

Only fences up to 3 feet tall are exempt. Phoenix requires a building permit for fences over 3 feet and up to 6 feet to show zoning and drainage compliance, and a full building code review for fences over 6 feet. Check your HOA rules too.

How much does a block wall cost in Arizona?

Homewyse prices a basic concrete block wall at $2,121 to $2,797 for 150 square feet of wall across Phoenix and Tucson ZIP codes, or $14.14 to $18.65 per square foot of wall face (May 2026 cost data). Height, footings and finish such as stucco add to that.

What license does a fence contractor need in Arizona?

The ROC's R-14 Fencing class covers metal, wood and cement block fencing and automatic gates, but not retaining walls. Wrought iron fencing and gates fall under R-24 Ornamental Metals. The R-21 hardscaping class allows fences and screens up to six feet but excludes perimeter fencing.

Why does caliche make fence posts cost more?

University of Arizona Cooperative Extension describes caliche as a cemented soil layer that can be several feet thick and rock-like. Angi's Phoenix fence guide says dense caliche makes fence installation harder there. Breaking through it for post holes takes more labor or a power auger.